Guangzhou Jhome Cnc Tools Co.,Ltd
BT-MLC Milling Chuck
1. High Clamping Force – Stable Under Heavy Loads
Precision needle bearing locking nut reduces friction and increases clamping force by 2–3 times
Dynamic clamping force 3× higher than standard ER collet chucks
Ideal for deep‑cut, high‑feed roughing – prevents tool slipping or pull‑out
2. High Accuracy – Low Runout
Bore concentricity ≤ 0.005 mm (measured at 2.5× diameter from the nose)
Precision balanced (G2.5 @ 15,000 rpm or higher optional)
Reduces unbalance – improves surface finish
3. Anti‑Loosening Design – Safe & Reliable
Patented anti‑loosening or double‑nut locking structure – stays tight under vibration
Hardened mating surfaces of collet and nut for long wear life
High‑strength BT taper shank with ≥85% taper contact ratio
4. Wide Range – Flexible Choices
Taper sizes: BT30 / BT40 / BT50
Clamping range: ø 6 – 32 mm (inch sizes 1/4" – 1" also available)
Collet series: MLC power collets, optional grooved / sealed design
Coolant: Through‑coolant ready (or optional universal coolant tube connection)
Product Tag:
BT-MLC Milling chuckBT-MLC Heavy Duty Milling Chuck
Powerful Clamping · Built for Heavy Cutting
BT Taper | High Rigidity | Anti‑Loosening Design | Low Runout
Product Overview
The BT-MLC Heavy Duty Milling Chuck features a BT taper shank (BT30 / BT40 / BT50) combined with high‑precision MLC collets. It is designed for heavy cutting, roughing, and high‑feed milling on CNC milling machines and machining centers. With a unique locking nut and collet system, it delivers much higher clamping force and rigidity than standard spring collet chucks – effectively suppressing chatter and ideally suited for HSS, carbide, and indexable milling cutters.
Key Advantages
1. High Clamping Force – Stable Under Heavy Loads
- Precision needle bearing locking nut reduces friction and increases clamping force by 2–3 times
- Dynamic clamping force 3× higher than standard ER collet chucks
- Ideal for deep‑cut, high‑feed roughing – prevents tool slipping or pull‑out
2. High Accuracy – Low Runout
- Bore concentricity ≤ 0.005 mm (measured at 2.5× diameter from the nose)
- Precision balanced (G2.5 @ 15,000 rpm or higher optional)
- Reduces unbalance – improves surface finish
3. Anti‑Loosening Design – Safe & Reliable
- Patented anti‑loosening or double‑nut locking structure – stays tight under vibration
- Hardened mating surfaces of collet and nut for long wear life
- High‑strength BT taper shank with ≥85% taper contact ratio
4. Wide Range – Flexible Choices
- Taper sizes: BT30 / BT40 / BT50
- Clamping range: ø 6 – 32 mm (inch sizes 1/4" – 1" also available)
- Collet series: MLC power collets, optional grooved / sealed design
- Coolant: Through‑coolant ready (or optional universal coolant tube connection)
Typical Applications
Machining Type Typical Use Mold roughing Stock removal, high‑feed milling Hard material machining Hardened steel, titanium, superalloys Heavy milling Deep cavity milling, shoulder milling, helical interpolation Rough boring Holding large‑diameter boring tools General milling End mills, corn cob cutters, etc. Technical Specifications

Type Cat. No L (mm) L2 (mm) L1 (mm) D (mm) d1 (mm) d2 (mm) BT30 MLC20-75 123.4 75 70 46 20 55 BT30 MLC20-90 138.4 90 70 46 20 55 BT40 MLC20-80 145.4 80 70 63 20 55 BT40 MLC20-100 165.4 100 70 63 20 55 BT40 MLC20-135 200.4 135 70 63 20 55 BT40 MLC32-90 155.4 90 75 75 32 73 BT40 MLC32-105 170.4 105 75 75 32 73 BT40 MLC32-135 200.4 135 75 75 32 73 BT50 MLC20-105 206.8 105 70 70 20 55 BT50 MLC20-150 251.8 150 70 70 20 55 BT50 MLC32-110 211.8 110 75 80 32 73 BT50 MLC32-135 236.8 135 75 80 32 73 BT50 MLC32-165 266.8 165 100 80 32 73 BT50 MLC32-200 301.8 200 90 80 32 95 BT50 MLC42-110 211.8 110 125 90 42 73 BT50 MLC42-130 236.8 130 130 90 42 73 BT50 MLC42-165 266.8 165 90 90 42 95 Usage & Maintenance Tips
Clean before mounting – Clean BT taper shank, spindle taper bore, and all collet mating surfaces – no oil or chips
Collet selection – Collet range must match tool shank tolerance (h6 or h7). Avoid oversize/undersize shanks
Tightening torque – Use a dedicated torque wrench. Recommended torque: 100–150 N·m
Periodic inspection – Check collet and nut wear every 200 operating hours; replace if worn
Balancing – For high‑speed machining (>12,000 rpm), perform complete assembly balancing for best results
Why Choose Our BT-MLC Heavy Duty Milling Chuck?
✅ Ground on imported precision grinders – accurate taper with stable contact
✅ High‑grade alloy steel – hardened to HRC 45–48, wear‑resistant
✅ 100% taper and runout inspection before shipment – inspection report included
✅ Works with standard MLC power collets and compatible with some other brands
✅ Customization available – length, coolant type, anti‑loosening design
✅ Fast delivery – popular sizes in stock