Guangzhou Jhome Cnc Tools Co.,Ltd
SNGG-N1
Application
Workpiece: aluminum, copper, magnesium and their alloys.
Operations: OD, ID, face turning, profiling. For finishing‑semi‑finishing, continuous and light‑interrupted turning.
SNGG‑N1 Carbide Turning Insert BP5205 For Non‑Ferrous Metal Machining

| 槽型 Grade | 型号 Specification | 牌号 Grade | 切削条件 Cutting parameters | ||||||||||||
| BP6305 | BP6315 | BP6325 | BP6335 | BP2205 | BP2215 | BP2225 | BP3205 | BP3215 | BP5205 | BP4205 | BP4215 | fn(mm/rev) | ap (mm) | ||
| N1 | SNMG120404-N1 | ★ | 0.05-0.30 | 0.20-1.50 | |||||||||||
| SNMG120408-N1 | ★ | 0.10-0.40 | 0.40-2.00 | ||||||||||||
| SNMG120412-N1 | ★ | 0.15-0.50 | 0.60-2.50 | ||||||||||||
★为第一推荐牌号 Recommended grade ☆为第二推荐牌号Optional grade
Product Overview
SNGG‑N1 negative rake ground carbide insert, developed for non‑ferrous metal finishing‑semi‑finishing. Equipped with wave‑style chip groove and sharp cutting edge plus polished surface and ultra‑precision grinding. BP5205 grade dedicated for non‑ferrous metals like aluminum, copper and magnesium, works for continuous and interrupted turning with smooth chip flow and anti‑built‑up‑edge performance.
N1 Chip‑breaker Features
‑Wave‑style chip groove & sharp cutting edge disperse cutting resistance to extend tool service life ‑Polished surface for smoother cutting and anti‑adhesion performance ‑Ultra‑precision grinding guarantees positioning accuracy and cutting‑edge quality ‑Suitable for finishing‑semi‑finishing of non‑ferrous metals
Grade Introduction
BP5205
‑Special grade for non‑ferrous metal turning ‑Sub‑micron grain substrate ensures good wear resistance ‑Optimized geometry reduces built‑up edge and improves chipping resistance ‑Suitable for continuous and interrupted turning of non‑ferrous metals (Aluminum, Copper, Magnesium etc.)
Key Advantages
- Wave‑style chip groove disperses cutting force, reduces edge stress and extends tool life
- Polished insert surface strongly suppresses built‑up‑edge and material sticking for Al / Cu alloys
- Ultra‑precision ground edge delivers accurate seating and excellent surface finish
- Sub‑micron substrate balances toughness and wear resistance for both continuous & light‑interrupted cuts
Application
Workpiece: aluminum, copper, magnesium and their alloys. Operations: OD, ID, face turning, profiling. For finishing‑semi‑finishing, continuous and light‑interrupted turning.
Selection Tips
‑BP5205: preferred for non‑ferrous Al/Cu/Mg finishing‑semi‑finishing, for continuous & light‑interrupted machining; not for steel or cast iron.