Guangzhou Jhome Cnc Tools Co.,Ltd
WNMG-M3
reviews
Applications
- Workpiece Materials: Austenitic stainless steel, martensitic stainless steel, duplex stainless steel and various other stainless steels
- Machining Operations: Finishing to semi-finishing, semi-finishing to roughing, universal machining
- Typical Workpieces: Stainless steel tubes, valves, flanges, shafts, structural parts
- Cutting Conditions: Continuous cutting, light interrupted cutting, general interrupted cutting, low-medium-high speed cutting, both dry and wet cutting available
WNMG-M3 carbide insert for stainless steel semi-finishing
| 槽型 Grade | 型号 Specification | 牌号 Grade | 切削条件 Cutting parameters | ||||||||||||
| BP6305 | BP6315 | BP6325 | BP6335 | BP2205 | BP2215 | BP2225 | BP3205 | BP3215 | BP5205 | BP4205 | BP4215 | fn(mm/rev) | ap (mm) | ||
| M3 | WNMG080404-M3 | ☆ | ★ | 0.12-0.30 | 0.20-2.50 | ||||||||||
WNMG080408-M3 | ☆ | ★ | 0.15-0.45 | 0.50-4.00 | |||||||||||
WNMG080412-M3 | ☆ | ★ | 0.18-0.55 | 0.80-5.00 | |||||||||||
★为第一推荐牌号 Recommended grade ☆为第二推荐牌号Optional grade
Product Introduction
WNMG-M3 is an 80° hexagon negative-type carbide turning insert. The M3 geometry is specially designed for stainless steel semi-finishing, paired with two professional stainless steel nano-coated grades: BP2215 and BP2225. The 90° approach angle design effectively avoids machining interference, making it suitable for universal semi-finishing of various stainless steels. The special groove design provides stronger versatility, and the special material combination enables cutting at low-medium-high speeds with excellent cutting performance. Both grades adopt nano coatings with low friction coefficient, effectively reducing adhesion between workpiece and cutting edge and suppressing built-up edge. It can perform multiple turning operations including external turning, facing and profiling, delivering efficient and stable performance in both dry and wet cutting.
M3 Chip-breaker Features
- Specialized for stainless steel semi-finishing
- Special groove design with stronger versatility
- Special material combination, suitable for low-medium-high speed cutting
- Suitable for universal machining of various stainless steels with excellent cutting performance
Grade Introduction
BP2215
- Grade for finishing to semi-finishing
- Innovative PSiX-based nano coating, high hardness and strong high-temperature oxidation resistance
- Low friction coefficient, reduces adhesion between workpiece and cutting edge
- Suitable for finishing to semi-finishing of stainless steel under continuous or light interrupted conditions
BP2225
- Specialized grade for semi-finishing to roughing
- Adopts AlTiSi-based nano composite coating, high hardness and strong high-temperature oxidation resistance
- Low friction coefficient, reduces adhesion between workpiece and cutting edge
- Suitable for general to interrupted machining of stainless steel
Key Advantages
- M3 specialized geometry for stainless steel semi-finishing, special groove design with stronger versatility, adapting to various stainless steel machining conditions
- Special material combination supports full-range cutting from low to high speeds, with wide working condition adaptability
- 90° approach angle design adapts to stepped and profiling machining, effectively avoiding tool interference
- Dual-grade precise coverage: BP2215 PSiX nano coating for continuous/light interrupted finishing to semi-finishing; BP2225 AlTiSi nano composite coating for general to interrupted machining
- Both grades adopt low friction coefficient coatings, effectively reducing adhesion between workpiece and cutting edge, suppressing built-up edge and improving surface quality
- High-hardness, strong high-temperature oxidation resistant nano coatings extend tool life, suitable for universal machining of various stainless steels with excellent cutting performance
Applications
- Workpiece Materials: Austenitic stainless steel, martensitic stainless steel, duplex stainless steel and various other stainless steels
- Machining Operations: Finishing to semi-finishing, semi-finishing to roughing, universal machining
- Typical Workpieces: Stainless steel tubes, valves, flanges, shafts, structural parts
- Cutting Conditions: Continuous cutting, light interrupted cutting, general interrupted cutting, low-medium-high speed cutting, both dry and wet cutting available
Selection Tips
- For stainless steel finishing to semi-finishing under continuous or light interrupted conditions with high surface quality requirements, BP2215 is the preferred choice
- For general stainless steel machining with interrupted cutting conditions, BP2225 is recommended
- M3 geometry has optimal adaptability for universal machining of various stainless steels and full-range low-medium-high speed cutting scenarios
